Pentair Waterpress / Multi EVO-A Pump Pressure Booster Units

BOOSTER SETS - FIXED SPEED

Waterpress pressure booster units are made with self-priming centrifugal multistage electric pumps Multi EVO-A. They are supplied wired, complete with 24L or 50L expansion module, ready for installation and use. All models are certified for use with drinking water (ACS). Reduces water hammer effect. Reduction of the stating frequency with the 50L tank. Ideal as a water supply system in the building. Very easy to install. Ready to use.

APPLICATIONS
Lifting and distribution of water in domestic systems in continuous or intermittent operation
Pressurization systems
Washing systems
Irrigation

MECHANICAL DATA
Shaft - Stainless steel  X5CrNi18-10 (AISI 304)
Impeller - PPO reinforced with fibreglass
Motor housing - Did-cast aluminium
Pump housing - Stainless steel  X 5 CrNi 1810 (AISI 304)
Diffuser - PPO reinforced with fibreglass
Mechanical seal - Carbon graphite / NBR / SS
Contourface - Ceramic / NBR
Operating pressure max. - 8 bar
Type of liquid - Clean water without suspended solids or abrasive material
Temperature of the liquid max. - 50 degrees C
Suction height - 8m
Gasket - NBR 70 Shore A

ELECTRICAL DATA
Voltage - 1/N/P~230V
Power line - 1.5m H05 RN-F
Type of enclosure - IP55
Insulation class - F
Ambient temperature max. - 40 degrees C
Rotation speed - 2850 rpm